Diener electronic PlasmaBeam QUATTRO
Product Detail
The Diener PlasmaBeam QUATTRO is the atmospheric-pressure plasma system with the largest processing width in the PlasmaBeam series. Its key feature is the use of four plasma nozzles, which extend the effective processing width to 32 mm—making it ideal for the continuous treatment of wider bonding seams or larger surface areas.
Core Specifications
Generator and Power: Equipped with four plasma nozzles, with a total power of approximately 4 × 300 W. Regarding frequency, documentation varies—citing either 20 kHz (found in many commercial catalogs) or 40 kHz (as per official Diener PDF documentation); please refer to the latest product manual for the definitive specification.
Processing Width: Up to 32 mm, with the nozzles arranged in a staggered configuration. The unit weighs only about 1–1.5 kg, making it easy to mount on a robotic arm or install in a fixed position.
Process Gas: Dry, oil-free compressed air; requires an inlet pressure of 5–8 bar and a gas consumption of approximately 6–8 m³/h.
Applications and Integration
Suitable for the localized cleaning and activation of materials such as plastics, metals, glass, and ceramics. Typical applications include the pretreatment of wide bonding grooves, the cleaning of bond pads in the electronics industry, and inline integration for sectors such as automotive, medical technology, and packaging. The system supports both manual panel control and semi-automatic remote control.
Note: Processing must be performed while the nozzles and the workpiece are in relative motion. As the operation generates exhaust gases, an effective exhaust/ventilation system must be provided.











