KLA Primaxx Monarch 3 VHF Etch System
Product Detail
The KLA Primaxx® Monarch 3 is not a conventional plasma etcher, but rather a vapor-phase hydrogen fluoride (VHF) etching system designed specifically for sacrificial layer release processes in devices such as MEMS. It is tailored for use in R&D laboratories and low-volume production environments.
Core Process Principle
The system utilizes anhydrous HF and ethanol vapor under reduced pressure and elevated temperatures to perform isotropic etching, effectively removing sacrificial silicon dioxide layers. Ethanol acts as a catalyst to ionize the HF, while the water produced as a reaction by-product is maintained in the vapor phase and promptly removed. This completely eliminates "stiction"—a common issue in wet etching—and ensures compatibility with exposed metals, such as aluminum.
Equipment Configuration and Positioning
The Monarch 3 is a compact, modular system featuring a three-wafer processing chamber and a semi-automated wafer-loading system equipped with a load lock. The chamber utilizes a third-generation design, facilitating both the handling of different wafer sizes and routine maintenance. It offers a typical etch rate ranging from 0.01 to 1 μm/min and demonstrates high selectivity with respect to silicon, silicon nitride, and various metals.
Applications
The system is primarily used for sacrificial layer release etching in MEMS (such as accelerometers, gyroscopes, and microphones), as well as for the release processes involved in the manufacturing of MicroLEDs, RF devices, and photonic components.











